 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Teccor(R) brand Protection Thyristors Axial Leaded DO-15 Series (A/B Rated) SIDACtor(R) Device Description This DO-15 plastic package provides a through-hole version of the SIDACtor(R) device. This axial leaded device is ideal for Customer Premises Equipment (CPE) such as telephones, answering machines, modems, fax interfaces. The DO-15 package series can also be used for overvoltage protection for applications such as T1/E1/J1 trunk cards when the appropriate overcurrent protection is included. Features Agency Approvals Agency Agency File Number E133083 * RoHS compliant * Bidirectional transient voltage protection * Axial lead through-hole component * Teccor brand SIDACtor technology Protection solution to meet * YD/T 950 * YD/T 993 * YD/T 1082 * GR 1089 Intra-building * IEC 61000-4-5 * ITU K.20/21 Basic Level * TIA-968-A Electrical Characteristics VDRM @lDRM=5A Volts Min 90 120 140 170 190 220 275 320 VS @100V/s Volts Max 130 160 180 220 260 300 350 400 IH IS IT Amps Max 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 VT @IT=1 amp Volts Max 5 5 5 5 5 5 5 5 Min 30 25 25 25 25 25 20 20 Capacitance @1MHz, 2V bias pF Max 60 40 40 40 30 30 30 30 Part Number "_" = A or B Marking "_" = A or B mAmps mAmps Min 150 150 150 150 150 150 150 150 Max 800 800 800 800 800 800 800 800 P1100G_LRP P1300G_LRP P1500G_LRP P1800G_LRP P2300G_LRP P2600G_LRP P3100G_LRP P3500G_LRP P11_ P13_ P15_ P18_ P23_ P26_ P31_ P35_ * All measurements are made at an ambient temperature of 25C. * Listed SIDACtor devices are bidirectional. All electrical parameters and surge ratings apply to forward and reverse polarities. DO-15 Series (A/B Rated) Specifications are subject to change without notice. 1 Telecom Design Guide www.littelfuse.com (c)2006 Littelfuse Teccor(R) brand Protection Thyristors Axial Leaded Surge Ratings IPP Series 10x1000 s Amps Min 10x560 s Amps Min A B 45 80 100 * IPP applies to -40C through +85C temperature range. * IPP is a repetitive surge rating and is guaranteed for the life of the product. V-I Characteristics +I tr x td Pulse Waveform IPP - Peak Pulse Current - %IPP IT IS IH -V IDRM VT VDRM VS +V 100 Peak Value tr = rise time to peak value td = decay time to half value Waveform = tr x td 50 Half Value 0 0 tr td -I t - Time (s) Normalized VS Change Versus Junction Temperature Normalized DC Holding Current Versus Case Temperature 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 -40 -20 0 Percent of VS Change - % 8 6 4 2 0 IH 10 IH (TC = 25 C) 14 12 25 C 25 C -4 -6 -8 -40 -20 0 20 40 60 80 100 120 140 160 Ratio of Junction Temperature (TJ) - C Case Temperature (TC) - C 20 40 60 80 100 120 140 160 DO-15 Series (A/B Rated) Specifications are subject to change without notice. Telecom Design Guide www.littelfuse.com (c)2006 Littelfuse Teccor(R) brand Protection Thyristors Axial Leaded Soldering Parameters Reflow Condition - Temperature Min (Ts(min)) Pre Heat - Temperature Max (Ts(max)) - Time (min to max) (ts) Average ramp up rate (Liquidus Temp (TL) to peak) TS(max) to TL - Ramp-up Rate Reflow - Temperature (TL) (Liquidus) - Time (min to max) (ts) Pb - Free assembly 150C 190C 60 - 150 seconds 5C/second max 5C/second max 220C >60 - <150 seconds 250+0/-5 C 20 - 40 seconds 5C/second max 8 minutes max. 280C Peak Temperature (TP) Time within 5C of actual peak Temperature (tp) Ramp-down Rate Time 25C to peak Temperature (TP) Do not exceed Physical Specifications Terminal Material Lead Solderability Matte Tin-plated Axial leads MIL-STD-750, Method 2026 Environmental Specifications Operating/Storage Temperature Passive Aging Humidity Aging -40 C to ~ +150C 125 C, 1000 hours Meet Spec +85C, 85% R.H. 1000 hours Meet Spec MIL -STD-202 Method 107G +85C/-40C 100 times Meet Spec MIL -STD-202, Method 215 No Change MIL -STD-883C, Method 2007 .1, Condition A No Change Dimensions Thermal Shock [0.86] .034 [0.71] .028 [3.56] .140 [2.60] .104 [25.40] 1.000 MIN Solvent Resistance Vibration [7.62] .300 [5.80] .230 [25.40] 1.000 MIN Dimensions in inches and (millimeters) DO-15 SERIES DO-15 Series (A/B Rated) Specifications are subject to change without notice. Telecom Design Guide www.littelfuse.com (c)2006 Littelfuse Teccor(R) brand Protection Thyristors Axial Leaded Part Marking System Part Numbering System Pxxx 0 G X L RP XXXX XXXX First Line: Product Name (see marking column in table on page 1) Second Line: Lot number DEVICE TYPE P : SIDACtor MEDIAN VOLTAGE xxx : xxx volts CONSTRUCTION VARIATION 0 : Single SIDACtor chip used as a single device PACKING STYLE RP : Reel Pack per EIA RS-296 L : RoHS Compliant SURGE IPP Rating A : 45AMP 10x1000s B : 80AMP 10x1000s PACKAGE TYPE G : DO-15 Packaging Package Type DO-15 Description Axial Packing Quantity 5000 Added Suffix RP Industry Standard EIA RS-296 Tape and Reel Specification Symbol A B C D E F G H Description Component Spacing (lead to lead) Tape Spacing Tape Width Max. Off Alignment Reel Dimension Max Hub Recess Max. Abor Hole Reel Dimension Inches 0.200 0.020" 2.062 0.059" 0.250" 0.048" 13" 3" 0.68" 2.75" MM 5.08 0.508 52.37 1.498 6.35 1.219 330.2 76.19 17 .27 69.85 H A OVERALL LENGTH OFF CENTER BOTH SIDES (0.039") B A OFF CENTER BOTH SIDES (0.039") B OVERALL LENGTH C D C D H recess depth max 0.75" recess depth max 0.75" F F E E G G LABEL LABEL DO-15 Series (A/B Rated) Specifications are subject to change without notice. Telecom Design Guide www.littelfuse.com (c)2006 Littelfuse |
Price & Availability of P1800GLRP
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |